• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: Hunqapillar

GX7 Commute Challenge

17 Thursday Oct 2013

Posted by Brian Hanson in Cycling

≈ 2 Comments

Tags

bike commute, commute, commuter, cycling, Hunqapillar, Olympus 45mm, Panasonic GX7, Seattle


BH-1.jpgBH-2.jpgBH-3.jpgBH-4.jpgBH-5.jpgBH-6.jpg
BH-7.jpgBH-8.jpgBH-9.jpgBH-10.jpgBH-11.jpgBH-12.jpg
BH-13.jpgBH-14.jpgBH-15.jpgBH-16.jpgBH-17.jpgBH-18.jpg
BH-19.jpgBH-20.jpgBH-21.jpgBH-22.jpgBH-23.jpgBH-24.jpg

GX7 Commute Challenge, a set on Flickr.

These are pictures from my 2nd day of testing the new Panasonic GX7. Today I used the Olympus 45mm lens, and stopped for a couple hundred pics. Needless to say it was a slow commute. Notes from the rides:

1. There are some really big propellers near the trail in the shipyards by the Ship Canal trail.
2. I finally saw the fire training area being used!
3. The harvest is happening – grain freighters have been loading at the terminal for the past two weeks.
4. I have a really beautiful commute! Must never move…

Enjoy!

HunqLightFilmTest

16 Wednesday Oct 2013

Posted by Brian Hanson in Cycling

≈ Leave a comment

Tags

Clement, commute, cycling, GH2, GX7, Hunqapillar, Panasonic, rivendell, sackville, Xplor


BH-1.jpgBH-2.jpgBH-3.jpgBH-4.jpgBH-5.jpgBH-6.jpg
BH-7.jpgBH-8.jpgBH-9.jpgBH-10.jpgBH-11.mp4BH-12.mp4
BH-13.jpgBH-14.jpgBH-15.jpgBH-16.jpgBH-17.jpgBH-18.jpg
BH-19.jpgBH-20.jpgBH-21.jpgBH-22.jpgBH-23.jpgBH-24.jpg

HunqLightFilmTest, a set on Flickr.

Some pics from a test I’m doing comparing an equally lensed Panasonic DMC-GH2 (mine) with a new Panasonic GX7.

I really like the feel and build of the GX7 so far, and the photos look great. Now I just need to figure out if it’s worth the upgrade.  Can you tell which pics are GH2 and which are GX7??  I’m using the same lens on both cameras (Lumix 20mm f1.7), so it’s a fair comparison.

Anyhow – this is my Rivendell Hunqapillar set up monster-cross style with dyne lighting for the winter commute.

I really like the current revision of this bike with:
1. Albastache bars (mustache 2)
2. Clement Xplor MSO (40mm) tires
3. Flat pedals (VP)
4. SaddleSack Medium bag on front rack

It has been a fast, comfortable ride for the longer commutes I’m doing now that fall is upon us.

Camping With Bikes

06 Saturday Jul 2013

Posted by Brian Hanson in Cycling

≈ 10 Comments

Tags

a. homer hilsen, acorn bags, active volcanoes, ahh, albatross, B17, bicycle, bike, Bike Camping, cycling, cypres, drop bars, dureme, Gran Bois, hilsen, homer, Hunqapillar, LHT, Manny Principle, mountain rides, mt adams, rando, randonneur, rivendell, sam hillborne, schwalbe, Seattle, snow, Snow Bike, Snow Cycling, Surly, underbiking, volcano


Seattle vs. Portland Riv Rumblers

Last month, I met up with some fellow north-westerners for a couple mountain rides between Seattle and Portland.  The goal was a nice weekend with a potential shot at going over Babyshoe Pass early in the season.  If nothing else, we would see some snow and avoid the bugs that start swarming a bit later in the summer.  The 2-hour drive south reminded me why I live here.  Lots of wilderness very close to home.  I was driving to a rendezvous between 3 active volcanoes in the Cascades mountain range.  We would be closest to Mt. Adams with possible views from the ride, but Rainier and St. Helens were nearby, as well.  As I got close to Randle, WA, I lost all cell service – this was a signal that vacation time was ON!

North Fork Campground - Randle, WA

North Fork Campground – Randle, WA

We had reserved a group site at the North Fork Campground 12 miles out of Randle.  I arrived around the same time as Charlie (from Eatonville), and we started setting up in the reserved spot, but when the rest of the group showed up (Andy, Chris, and Aaron from Portland), we explored a few other sites, and chose one that was right next to the river.

Campin’ by the River

Not too many people were camping the weekend after Memorial Day.  With 4 tents and 1 hammock, we were spread out nicely.  Our camp could normally accommodate 20 tents!

Chris and Aaron’s Tents

The setting was beautiful Northwest – lush, green, and budding with spring.  Ferns, moss, and huge evergreens all around us.  It had rained quite a bit before the trip, but we were into a short spell of dry weather.

Full Camp?

After we set up camp, we set off on the first ride.  We chose FS 22 heading east, and it was a good immediate climb on gravel.

Day 1 Ride

We rode up leisurely as we all got to know each other.  A fair amount of time was spent off the bike taking in the scenery, and just geeking out on our setups. All but one bike was by Rivendell.  There were 2 A. Homer Hilsens ridden by Andy and Chris, a Hillborne ridden by Aaron, and Charlie’s lone Surly Long Haul Trucker.

Bikes of Day 1

I took the Hunqapillar on this ride.  Since it was an unofficial “Rivendell ride”, I had both my A. Homer Hilsen, and the Hunqa packed.  I wanted to see how they both fared on the rougher mountain gravel roads.  I had changed out the Nomad tires for my 50mm Duremes with their more aggressive tread and larger volume.  We didn’t get into much nasty trail, but the couple areas of “rough stuff” we hit made me appreciate the mammoth bike’s capacity as a real mountain bike.  It rode nicely over everything I threw at it, and it brought back memories of my early ’90s rigid Stumpjumper Pro.  The Albatross bars and front V-Brakes proved to be great on the rough trail.

First Day’s Apex

We took a side trail up an overgrown trail to a nice meadow with a great view back down the valley we had just climbed.  We rested for a bit, and had a snack before making the quick descent down to camp.  On the way down, we took another side trail down to the river.  This one was an older, overgrown jeep track and made for some fun riding over roots and blow-down.

Trail Riding on Day 1

Singletrackin’

After the nice descent back to camp, the Portland crew set about making a superb dinner of pasta and white sauce with morels and a great salad, while I walked around soaking up the camping atmosphere and helping Andy get a fire started.  His chopping knife was a trip!  We used that and a hatchet to make up the kindling.  Some of the wood was a bit wet, so it was a smokey end to the day.

Woodsman

Portland Crew Dinner

After a late night around the fire, and a great sleep by the roaring river, I felt refreshed as ever.  I set about making breakfast and coffee for the campers, and got most of my stuff packed up for a quick getaway after our day-2 ride.

Chilaquiles, anyone?

Another healthy meal

Charlie had to get home, so we bid him well, and took our group photos.  Ready for the next adventure, we set off on FS 23 with a destination of getting close to Babyshoe Pass and some scenic views of Mt. Adams.  Today, it was the Hilsen’s turn at gravel.  This bike was set up with standard rando gear – trod with Gran Bois Cypres tires, and carrying 2 cameras, rain coat and food in a Boxy Rando bag.  We hit the mountains on 3 AHHs and a Sam Hilborne.

Joy Riding!

Today’s ride was a bit more ambitious.  If all went according to plan, we would double the distance and elevation of the prior day with around 40 miles and 5000 ft of climbing.

Wing formation

With a bit more shade, the day was perfection for a long ride.  Amazing views around every corner helped to keep everyone jazzed.  Destination snow or Babyshoe.  Most likely snow, but who could tell?

Destination? Who cares…

After a while the road turned to gravel, and we started climbing in earnest.  We finally hit snow within a mile of our destination at around 4300′ elevation.

End of the dry road

Andy noticed that there should be a fork within a quarter mile, and after a short committee decision where we invoked the “Manny Principle”*, we forged ahead to the adventure that awaited us all!  It ended up looking something like this:

Pushin’ on…

And this:

More pushin’…

Until we found a meadow, the fork, and paved road again.

Meadow

Fork

It was a short respite as we turned around heading NW on the north slope that didn’t seem to want to start declining too soon.  We ended up pushing/straddling our new snow bikes for a mile or so before we ended up back in the mostly snow-free but still very wet next phase of our ride.  During the snow phase, it was great fun to see how far you could bike in the tire tracks that had been lain some unknown time prior to our arrival.  Most of the time, you could sit on the saddle and paddle along with your feet on the raised snow, but if you pedaled, your feet sunk into the banks.  I had a successful ride through one of the snow fields, and my confidence was raised enough to try to ride the next one (larger and deeper unbeknown to me), so I got some speed up for the attempt.  As I started across it, things went sideways – my front tire started out riding up on the old tire tracks, but quickly sunk in.  Once that started, it was only a few seconds before it swallowed the wheel enough to catapult me over the bars in a spectacular (to the watching jays) endo, spilling me and my entire bag’s worth of food and camera gear into the snow.  Nothing hurt in a snow landing, and the bike checked out.  After a hasty re-packing and snow dusting, I was back on my way.

Snow cowboys!

After Andy’s toes had thoroughly gone numb in his sandals, the road finally turned back to gravel, but it was not much of a road at that.  This was definitely less-traveled with snow melt ruts, random sharp fist-sized stones, and lots of overgrowth to keep you busy.

Descending

Recalling the joys of descending on a mountain bike, I quickly rode far past my current bike tire’s capacity hitting speeds around 30mph, and suddenly felt my rear tire go limp.  Yes – a pinch flat will kill a descent faster than a broken regulator.

Testing the kit in the wild

After the break, we got back to the art of the fast mountain ride, and had a great time with over 5 miles of glorious downhill under-biking.  I had no idea a rando bike with skinny 31mm tires could handle terrain I usually ride on a front suspension MTB.  Still, the Hunqapillar may have been a better choice for day 2.  I had pushed, and perhaps found the limits of the AHH.  With no real harm done, at that.

It’s like skiing in the summer!

Back on the pavement, I appreciated the final minutes of the ride with new friends.  When we got back to camp, we all congratulated each other on an excellent adventure, and vowed to come back in years to come.  I am hoping that this was the first of many trips to the volcanoes.  With the beauty of the rides, and the amazing lack of population and drivers, it’s a treasure close to home.

Snow tires!

The path on Day 2

The path on Day 2

* Manny Principle – according to Smitty:

“Mere uncertainty and tardy-ness are not sufficient reasons to abandon an adventure. Unless danger is imminent, the adventure must move forward.”

Albatross Bar Conversion

23 Thursday May 2013

Posted by Brian Hanson in Cycling

≈ 2 Comments

Tags

albatross, bike bags, bike basket, bike commuting, commuting, country bike, Hunqapillar, midge, nitto, rambler, rivendell, truck


Back when I was riding a mountain bike to work regularly, I bought Albatross bars to get a more upright position.  While I enjoyed the wide range of positions for my hands, the one issue I had was a lesser ability to get “aero” when it was windy.  In my rambling experiments, these fell out of fashion after a time and I moved on to drops.

Original Albas

I recently revived the bars when I wanted to get my camp bike set up for an upcoming Seattle/Portland Riv Ramble that will be happening near the halfway point of Packwood, WA.  I started the conversion away from the road-friendly Nitto Noodles to the more dirt oriented Midge bars.  They seemed to be too much of a compromise in that they didn’t offer the feel of drops with the big vertical differences, and didn’t have an “upright” position.

Midge Conversion

The Albatross bars are all about upright, but also flare forward of the stem for a stretched position.  There is also the near-stem narrow position that gets one in a nice aero setup, as well.  I had an older mountain bike stem from a ’92 Stumpjumper Pro that had enough reach to push the Albatross bars out far enough to get that aero position I need for the windy days, as well as enabling me to extend the bar ends back even more with bar end shifters.  Here’s what it looks like:

Albatross with long stem

I got a chance this week to test the wind theory, with a couple commutes.  May is a great month for me as the wind often shifts mid-day giving me headwinds both ways.  Using the inner hand position, I was able to get a nice aero tuck on the bike.  Holding the forward curves also kept me out of the wind, and if I bent my elbows, I could get nearly as aero as on drop bars.  The leverage from 56cm bars is another great benefit of these bars.

Bars from the back

Riding with Albas may even be safer on a commute.  For example, I take a route that runs downhill on a busy arterial on the way into work, and often cars are backed up across intersections. There is constant danger of cars/bikes/people crossing in front of me between stopped traffic.  I noticed right away that riding upright affords a much better view of traffic and potential collision fodder.  Side benefit or primary if you’re a safety hound…

Bagger

OK – I’m not fooling myself, part of why I like this setup is that it is the configuration of the Riv video that originally piqued my interest in the Hunqapillar, and it gives the bike a different, more specific setup than my other bikes.  It really is a country rambler, camp/tour bike now with the capacity to be a great commuting “truck” when I need/want to carry a lot of cargo.  As it is a stiffer bike than the Homer, it feels both heavier, and more solid when carrying loads.  That’s great if I’m not tired out, but I’ll have to evaluate it after a couple days of touring around in the hills.

 

 

Middle Nomad

30 Saturday Mar 2013

Posted by Brian Hanson in Cycling

≈ Leave a comment

Tags

bicycle, bike, cycling, dureme, Hunqapillar, Nomad, Resist, rivendell


My continued adventure on the Hunqapillar.  Today I put Resist Nomads on the beast, and removed the 50mm Duremes.  Although I love these tires, they are heavy, and make my ~1000ft ascent home tougher than I want it to be.  These Nomads may be a good medium.

The cushion for pushin’

This tire is rated as a 45mm, but most folks measure it out at about 41mm.  I’m going to wait a few days for a measurement so it can stretch.  First impressions are good.  It rolls smoothly, has plenty of plushness, and less weight than the Schwalbe.  It’s definitely not as plush as the Cypres or Jack Brown Green, but for what this bike is for, I would like a bit more rubber on the road, and I’m always chasing the mythical Hetre in 700c.  This is a haulin’ tourin’ mountain bike.

Up Front

The tire is a wire bead.  It mounted on the Synergy with minimal finger pressure – no need for irons if you have a flat.  The sidewall is a bit darker than the light yellowish typical skinwall.  This works really well on the bike with the amber overtones of the shellac, and the mahogany wood fenders.

Tread

The tread is a square pattern similar to the Jack Browns, but without the slick parts.  It handled riding no-handed in my short test ride without unusual amounts of wobble.  I felt the street, but most of the hi-frequency vibration was absent.  The tires were inflated to 30psi front and 50psi rear.

Purdy

Next steps are to do some serious riding in the dirt and trail.  I will take them for a quick ride down my favorite dirt path tomorrow and check for grip.  Need some more mountainy bars on this beast.  The noodles are great for road riding, but this thing wants to be in the dirt, and I have a nice road bike.  Next up are either Midge bars or Albatross.  I may put the basket back on, too!

 

 

← Older posts
Newer posts →

Flickr Photos

BH-68.jpgBH-67.jpgBH-66.jpgBH-65.jpgBH-64.jpgBH-63.jpgBH-62.jpgBH-61.jpgBH-60.jpgBH-59.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 96 other subscribers

Blog at WordPress.com.

  • Subscribe Subscribed
    • Cycle Seattle
    • Join 96 other subscribers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Subscribe Subscribed
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar
 

Loading Comments...