Middle Nomad

30 Saturday Mar 2013

Tags

bicycle, bike, cycling, dureme, Hunqapillar, Nomad, Resist, rivendell

My continued adventure on the Hunqapillar. Today I put Resist Nomads on the beast, and removed the 50mm Duremes. Although I love these tires, they are heavy, and make my ~1000ft ascent home tougher than I want it to be. These Nomads may be a good medium.

The cushion for pushin’

This tire is rated as a 45mm, but most folks measure it out at about 41mm. I’m going to wait a few days for a measurement so it can stretch. First impressions are good. It rolls smoothly, has plenty of plushness, and less weight than the Schwalbe. It’s definitely not as plush as the Cypres or Jack Brown Green, but for what this bike is for, I would like a bit more rubber on the road, and I’m always chasing the mythical Hetre in 700c. This is a haulin’ tourin’ mountain bike.

Up Front

The tire is a wire bead. It mounted on the Synergy with minimal finger pressure – no need for irons if you have a flat. The sidewall is a bit darker than the light yellowish typical skinwall. This works really well on the bike with the amber overtones of the shellac, and the mahogany wood fenders.

Tread

The tread is a square pattern similar to the Jack Browns, but without the slick parts. It handled riding no-handed in my short test ride without unusual amounts of wobble. I felt the street, but most of the hi-frequency vibration was absent. The tires were inflated to 30psi front and 50psi rear.

Purdy

Next steps are to do some serious riding in the dirt and trail. I will take them for a quick ride down my favorite dirt path tomorrow and check for grip. Need some more mountainy bars on this beast. The noodles are great for road riding, but this thing wants to be in the dirt, and I have a nice road bike. Next up are either Midge bars or Albatross. I may put the basket back on, too!

Rivet Redux

20 Wednesday Mar 2013

Posted by Stonehog in Cycling

≈ 3 Comments

Tags

cycling, Pearl, Rivet, saddle

I’m throwing in the towel on the Rivet Pearl. I’ve given it 700+ miles at this point, and it still feels too stiff on my sitz bones. The bummer is that the shape and the cutout is perfect. It just uses leather that is either way too stiff, or I just don’t weigh enough to dent it. I also love the finish and adjustability. The rails are nice and long.

Too Tough

If I rode with a chamois pad all the time, this would be a comfy saddle, but I do a lot of miles with no pads on my commute, and I get plenty of 20-mile+ comfort from a standard broken in Brooks B17, or better still, a Selle Anatomica Titanico.

Time to find the Rivet a new home. Let me know if you are interested in trying it out.

Drop Some Wisdom

17 Sunday Mar 2013

Posted by Stonehog in Cycling

≈ Leave a comment

Tags

200k, cork tape, cotton bar tape, drop bars, hand comfort, nitto, Nitto B-115, nitto noodles, noodles, Olympiade, populaire, porteur, randonneur, ride comfort, rivendell, VO

When I started riding road bikes again around 2009, I read a lot of opinion on the “internets”, and a few things were spoken of as gospel. One of these was:

Drop bars, in particular Noodle bars are great for long term comfort (Discussion Thread from ’09)

I’m a dedicated experimenter/tweaker when it comes to building and riding bikes. I had been on road bikes with drop bars for a short period of my life from about 1983-1991, but mainly as a part-time commuter. I never raced, and only did one 2-day 150 mile ride in high school.

My old road bike – Raleigh Reliant

When I moved to Seattle in 1991, I rode a friend’s mountain bike down some fire trails in Whistler, BC, and was totally smitten. From then until 2009, I had various mountain bikes with flat bars. When I bought my first Rivendell, I tried 46cm Noodles, but found them uncomfortable. Specifically, when I was in the drops, they felt really deep/extreme, and my forearms hit the tops disconcertingly. There was something off.

Cupcake and Homer with 46cm Noodles

I found VO Porteur bars to be a better fit for me initially, as they had a nice stretched-out thin position on the flat fronts, and I could also get very upright on the swept back part of the bars. I went through a few iterations with these bars until I started riding in longer Randonneur events. On one Populaire, I developed a bit of numbness in one hand at the 50-mile mark, even with soft cork tape. I was definitely the only rider using upright bars of any kind, and most of the folks were using drop bars of some sort.

Porteur with Cork and Cotton

I decided that I would have to try some drops for the longer 200k ride I had planned. I had an older pair of Nitto B-115 Olympiade bars from the 80s, and the width was a tiny 39cm (compared to the 46cm). I set these guys up, and found them comfortable on my commute (7-12 miles each way). I also found that my forearms didn’t hit the tops of the bars when I was in the drops. The next test was the Bellingham 200k.

Olympiades

At the end of the event, I had no hand discomfort, and felt that the bars were close to ideal. They just needed more width, and a bit of curve back like the old noodles had on the tops. This led me back to the beginning (almost) and the Noodle style I started out with. I went with the next bigger size of Noodles and have not gone back to uprights.

Sometimes it is best to listen to the wisdom/opinion of experienced riders in the first place. At least cheaper…

Faves! Nitto Noodle 42cm with SRAM S500 Levers

Spring 200k

11 Monday Mar 2013

Posted by Stonehog in Cycling

≈ 4 Comments

Tags

a. homer hilsen, Biologic, cyclemeter, Escape from Seattle 200k, garmin, Hahn Rossman, iphone, jan heine, rando, rivendell, Seattle Randonneurs, Selle Anatomica, SIR, son 28, SON Delux, Titanico X, Wool

Randos!

I started my rando season yesterday with a 200k that conveniently began and ended within a mile of my house. There were probably 100 folks that started this ride. It was a great day with temperatures ranging from 38-65 F resulting in little need for more than a couple wool jerseys and a vest. No rain – just a bit of fog for the first few hours with sun breaks at the tops of any hill over 300 ft.

Jan and Friends

Jan Heine was at the start with his lovely chrome rando bike, and was the first one out of the gate with his friends and riding partners including Hahn Rossman who was test riding a Mad Fiber bike. I rode the whole ride with my new pal Bruce, and was grouped up for a while with Asta and a friend who had ridden up from Portland the day before. Wow – 200 miles up, and 200k for the ride. Solid!

Cockpit

This was a test for me in a couple of ways. The most mileage I have put into a ride in the past 8 months was a 38 mile training ride. I have been commuting over 200 miles a month for the past few years with 3-4 days per week the norm. I also end up doing a lot of climbing on my commute, so this definitely helped. I also benefited from a few longer rides last year, as well as a bike fit. I found a few things that didn’t work once the mileage got over 50 (plain B17, lack of consistent nutrition and water). On this ride, I started eating and drinking right away, and never really stopped. My riding app (cyclemeter) said I burned 7500 calories on the ride, and I’ll bet I only had a slight deficit by the end, although 2 bowls of chili and a beer definitely went down with no problems!

Pit Stop

I also got to put some miles on a Selle Anatomica Titanico X which I’ll write up later. Verdict? No saddle soreness with my Ibex wool knicker/tights. The iPhone Biologic rig worked, but it took finessing to keep it charged. I ended up having to turn off the display and lights to keep a charge going to the battery. Verdict? Use the SON28 (more output) on these rides, and leave the Delux on the other bike for now. That or look into a smaller battery powered GPS, but I’ll be damned if I’m going to jump back to the Garmin without giving the larger SON a try first.

Beautiful Day!

Overall, at the end of the ride, I felt tired, but great. My right knee was a bit sore, but the pain was gone by Sunday night. I think a 300k is actually in my sights. It was a great start to the season!

Extra pics from the ride on Flickr

Follow up to Racers

07 Thursday Mar 2013

Posted by Stonehog in Cycling

≈ 1 Comment

Tags

brake modulation, brake release, modulation, Paul Racers, Racers, Silver, Silver Sidepull

Cable Button on Racers

I’m doing a brevet this weekend, and put some lighter tires on in preparation. I ran into an interesting dilemma – the Paul Racers that I had recently put on in place of my Silver Sidepulls were much harder to release. I had to lengthen the hanger cable so I could get the cable button out of the brake arm release. Now there is more play in my lever before the braking starts. Annoying.

This was a simple flip of the finger before with the sidepulls. Wow – there is something to be said for simplicity. Don’t get me wrong, the Racers are beautiful and have better modulation than the Silvers. BTW – for me this means there is more action or length of pull at the lever for the equivalent brake force, and the braking force increases incrementally as I move the lever through its arc – i.e. it’s not grabby and has more feel. Important to some, but I got used to v-brakes, so I don’t really notice it much.

The Silvers had just as much stopping force, no exposed cable, and are much easier to release. This comes in handy when I have to change a tire on the side of the road. Sometimes I should just leave things well-enough alone…