Hunqa Builder

Tags

, , , , , , , , , , , , , , ,


It was time for a new bike for 2012.  This one is for the mountains!  It’s a wooly mammoth bike!  I rode one last summer at Rivendell World HQ and was smitten.  I just love Rivendell bikes.  Their design and execution is unlike any other, and Grant runs a great business. I decided to snarf up a Rivendell Hunqapillar.  It’s a 54cm frame, and will be set up as a mountain/camping/commuting bike with a front rack, fenders, and lights (like any proper bike for the NW).  This was in the original color scheme that is being discontinued.

The Rivendell folks are well known for their expertise in packing a bike – they even add doodle art to the packages – great personalized funk!

top face

stuck and safe

wrapped up tight

Here it is all uncloaked.  I love the color scheme on this model.  There is something about the kidney bean and gray combination that really classes out.  I felt lucky getting one of the last of the original runs.

profile

front quarter

love

tusks

 

The build out will be a moustache cockpit, brooks saddle, and marathon dureme tires (700×50).  This will be a working bike, and I want to take it anywhere.  I also want to be comfortable on the bumps.

kit

I’m adding a custom rack made by a local builder “Haulin’ Colin” Stevens.  This was originally designed and made for the Rawland rSogn, but I saw it on his site modeled on a Hunqapillar that a friend had lent him, and the image stuck.  The rack fits the bike perfectly.

haulin’

mounts were perfect

I have a few more parts to get or scavenge before this one is ready, but I’m anticipating a great new ride.  The frame and fork with headset weighed in the neighborhood of 7 lbs on my Wii scale (accurate??).  This is a stout tube bike, but it felt surprisingly light.  I recalled it being much lighter than I expected on the test ride, as well.  This model is a more robust touring bike than the well-loved Atlantis, and has similar gauge tubing to the Bombadil.  I can’t wait to do some exploring this summer!

Grant Petersen in Seattle on May 11th

Tags

, , , , , , , , , , , , , , , , , , ,


From Momentum Magazine Article

One of the big influences in the modern bike renaissance of steel frames, leather saddles, 650b wheels, fatter road tires, and all around comfortable fun biking is coming to Seattle on Friday, May 11th to talk about his new book “Just Ride – A Radically Practical Guide to Riding Your Bike”.  I have one of his bikes and can attest to the well thought out design, beauty, comfort, and detailed execution of a Rivendell bicycle.  He designed and marketed bikes for Bridgestone in the US from 1984-1994, introducing much loved iconic bicycles such as the RB-1, MB-0, and the thoroughly offbeat and cult status XO-1.  His writing and design of the Bridgestone catalogs and Rivendell Readers has drawn a good-sized following of serious bikers who didn’t (and don’t) follow the mainstream race fork of bicycle marketing and industry.  Jan Heine of Bicycle Quarterly did a great write up on him a few months ago on his blog: http://janheine.wordpress.com/2011/12/28/people-who-have-inspired-us-grant-petersen/.

I’ve met Grant a couple times at his humble company headquarters in Walnut Creek, and he is the kind of personality who exemplifies the caring, leader of a modern American small business that treats its employees and customers well, and seems to make it through rough economic times (as well as good times) without trying to sell and appease towards only short term profits.  Dude’s got it going on!  He finds and markets products that are higher quality, longer-lasting, and may not be available if it were not for Rivendell’s market pull.  The variety of things you can find on the Rivendell site boggles and really shows the unique mind that is Grant.

He will be talking about his latest book and answering questions on Friday, and I would love to give him a warm welcome to Seattle.  I will be leading a ride after his discussion that will be a flat and casual tool down to the locks and Golden Garden Park.  Specific details are below:

Where:  Free Range Cycles

When: Friday May 11th, 5pm

What: He will do a book presentation from 5-5:30pm, a question and answer session from 5:30-6pm and a bike ride from 6-7pm.  They will have books to sell.

Proposed route:

http://runkeeper.com/user/Stonehog/activity/86076095

Rack Mounting Variation

Tags

, , , , , , , , ,


Original PlatRack

This is a picture of how I had originally mounted my front Rivendell/Nitto PlatRack on my bike.  I have always liked having the larger platform of the Platrack on my AHH, but disliked the long struts that stretch down to the fender mounts by the axle.  I had removed the rack for the rando season a few months back, but have wanted to put it back on a few times, because it is so handy to have the extra load surface when commuting.

I have had an idea to do an alternate strut configuration rolling around in my head for the past few months, and finally decided to take action.

Multiple Bends Needed

After watching one of the Rivendell videos on mounting a rear rack where they bend the struts with a couple of good hammer whacks, I was inspired.  I bent and shortened the long struts to join at the mid fork braze-on where the other struts from the Mark’s Rack join.

Both Struts Now Attach Here

It is likely “not quite” as strong, and I’m sure it’s a warranty voider in Grant and Nitto’s eyes, but I don’t carry much more than 10 lbs on the front.  In any case, it feels solid as a rock to me.

View from the Front

Because of the imperfect hammer-bending technique I employed, I found that the fender line needed a bit of work after the first mount try.  I loosened up the strut screws where they met the Marks and Plat Racks, and try to cold bend it into the proper position to get better alignment and keep the whole assembly as non-stressed as I could make it.  I also took the opportunity to move the Edelux light to the hole that was off-center.  This will move it out of the line of spray if I’m in rain and there is water coming off the front of the tire.

Showing the New Top Bend

I’ve now ridden with this setup on numerous commutes and a 20 miler.  I also removed the saddlebag and went with just a front rando bag with the tools consolidated.  My Acorn is stable and rides on the rack well, even though it is a smaller footprint.  The bike has been stable for no-handed riding, and with less weight on the saddle, it seems to have less speed wobble with this setup.  I also feel like I get more active suspension from this setup, as it leaves the front fork’s lower half free of additional struts.

Final Shortened Bent Strut

If you have thought about trying something like this, I would encourage it.  It was a simple procedure that just required a mallet, hacksaw (for trimming the longer strut down to size), and some patience.  I basically eyeballed the bend on one side, and tried to do the second strut in the same angles.  It took a total of an hour or so to get what I wanted.

 

My First 200k

Tags

, , , , , , , , , ,


After working up some distance with a couple Populaire’s and a 32 miler over the past few months, I signed up for, and rode my first full 200k (126 mile) brevet.  I had planned to head to Portland with my wife and daughter for a “brewpub” 100k, but when travel plans fell through, I saw that SIR was doing the Bellingham 200k the same weekend. Perfect intro to the longer distance!  It was a relatively flat ride for the area with 3-4k feet of elevation gain, so it seemed pretty reasonable for me to test my fitness.

The night before was packing and prepping.  I knew there was a chance of rain, and it would be in the upper 30’s to lower 4o’s most of the day, so I put an extra wool jersey and tights in my saddlebag, as well as spare socks and a hat.  I brought my rain gear thinking I would just pack it if necessary.  In the front rando bag, I put a couple packets of Perpetuem drink mix, some Nuun tablets for electrolytes, and various snacks like dark chocolate, a roll of Thin Mints (my daughter is a Girl Scout), and some snack mix.  I also threw in a couple small cans of V8.  Locked and loaded, I checked the bike and got my new Garmin eTrex set up and ready.  I did a dog walk, and then tried to follow the same 1 mile track on my bike.  After experimenting, I found a fairly good dashboard for biking that allowed me to navigate like I do in a car GPS in following a marked line.  I had downloaded the route earlier, so I had that ready to go.

Other incidentals in the bag were spare batteries, 2 tubes, and the usual tool kit for flats and such.

After listening to increasing rain all night, I had go get up at 4:30am to get up to Bellingham by 6:30 for check-in.  Driving up, I noted that the 1.5 hour drive at 60mph was less distance than I would be riding for the day, at only about 76 miles.  Intimidating, but I felt ready.  I stopped for a coffee at Starbucks, and the barista said there were a number of folks passing through that were on their way to a run, climb, or bike ride.  I was definitely not going to be alone on this wet day.

As I neared Bellingham, it started to snow.  Now I was getting excited!  The snow wouldn’t stick – it was too warm.  It would certainly be invigorating.

The machine

We left the coffee shop at 7:32am, and I told myself to take it easy and try not to burn out of the gate.  I had a long ride ahead.  There was a secret control not too far down the road at a lookout on Chuckanut Drive (normally a panoramic beauty of a road).

Chuckanut Drive

As it was snowing and cold, I commented that it probably couldn’t get any worse, and of course that sealed our fate for more of the same for the next few hours.  As we rode along Lake Whatcom, it started snowing harder, and seemed to be sticking everywhere but the road.  As we exited the lake’s northern end, I happened to run into a road race that was just getting started.  I pulled to the side for a cookie when the pace/support cars and about 30 riders came by climbing a long hill.  I thought to snap this pic a bit too late, but it shows the nasty conditions pretty well:

Road Racing

After this point, things started to look up.  I continued to ride solo as I had from the start.  I was trying to keep an easy pace, but also realized that the headwinds I was starting to run into would not help.  Luckily, I had tailwinds going north.

Definitely Sticking

Getting up to Sumas was a trip – lots of semi-flooded farmland that seemed to be growing hazelnuts.  I snapped a lot of pictures as the clouds were starting to clear and the sun was starting to break through occasionally.

Hazelnut Farms

Once I got to the border, I realized I had come a long way.  It felt like I was days away from Bellingham, but I still felt pretty good.  I had been keeping up with regular eating and taking water, and still had plenty of go.

Still Smiling at 100K

Now it was time to start heading back towards the water.  After riding along the invisible Cascade foothills, I started to get into a headwind.  This wasn’t too bad, but it definitely slowed me down, especially in the relatively few hilly sections.  It was a bit of a bummer saying goodbye to the mountains.

Goodbye Mountains

Riding on the border was a trip.  This section is populated and mainly farmland.  There was a road on the US side, a small ditch, and a road on the Canadian side.  It was like riding down a split highway.

Don't Jump That Ditch!

I saw quite a few border patrol cars, but it’s interesting seeing the big border crossings built up, and riding roughly 20 miles where one just has to jump across an open ditch to be in another country!  Along the boundary roads, I came upon another rando rider who blew a sidewall and needed a spare tire (not tube).  I told him that I hadn’t brought one, but may start packing one on future rides.  He told me it was the first time it happened to him in 20 years.  After wishing him good luck (and making sure he had a phone), I continued on.

Nice Border, Canada!

When I arrived in Blaine and saw the water again, I really knew I could do it.  It seemed so close now.

Puget Sound At Last!

At one of the controls, I met up with a couple riders who were fueling up, so I rode with them on an off for the next 20 mile or so.  It was getting windy now, and the forecast northwesterly winds turned out to be southwesterlies.  The paceline helped us get through the headwinds down to the Lummi ferry.  Riding in the Lummi nation was pretty cool.  I waved to a lot of folks on the way, and they waved back.  This was definitely friendly country, and not the hostile city environment I’m used to.

Ferry to Lummi Island

Lummi Land

At this point, there was all of 15 miles left – my typical commute.  I felt like I was in ok shape, but I definitely wanted to get back.  I started out faster, and quickly lost sight of my drafting friends.  There was a nice tail wind heading back north up the peninsula.  Lots of great views across the water of the final destination.  This was great motivation.  I was down to my last bit of water, and still had plenty of food, so things were looking really good.

Final Destination Just Over There...

Not Much Farther

Wild Tidal Patterns

The last 10 miles went by quickly, and I soon found myself in the final control with a group of happy Randonneurs congratulating me on finishing my first 200k!  Wow – it turned out really well, and I have to thank all the folks that encouraged me on the way.  This was a fast crowd.  I came in at 11 hrs 4 minutes, but the majority of the riders were in under 10 hours.  There were only 5 DNFs, and one that didn’t make the cutoff, but I was surprised that so many folks kept going with all the snow from the first half of the ride.

Back at Last

Consequently, my spare summer gloves came in handy.  I changed out my soaked winter gloves halfway through, thinking that the new ones would quickly freeze my fingers, but my hands and feet remained toasty after the rain stopped.

Now that I’ve done this distance, I can see doing a 300k, but 400 and up looks mighty challenging.  I definitely have no illusion that folks that pull off a 600k or 1200k are truly tough individuals!

Made it Without a Mechanical

Happy 200k'er

Chilly Hilly 2012


Boarding the BI ferry downtown SeattleChilly Hilly 2012-2Glimpse of SeattleChilly Hilly 2012-4Are those snow flakes?Chilly Hilly 2012-6
Lots of baked goods for sale on this rideNon-plussed?Snow in the airChilly Hilly 2012-10Return FerryBike Parking

Chilly Hilly 2012, a set on Flickr.

This was my second Chilly Hilly. It was a fresh day in the upper 30’s, with light snow between sun breaks. I felt great on this ride and tried out some new foods to see how I would react for later, longer rides. I felt great on the second half of the ride. No sign of the bonk that I hit at the 30 mile mark on my last Populaire. The only thing I would change is the pure number of cyclists. I did this one solo in a sea of 5000+ bikers. If I’m riding alone, I’d prefer to just be alone.