• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: rSogn

Initial Velo Routier Notes

03 Monday Mar 2014

Posted by Stonehog in Cycling

≈ 15 Comments

Tags

4130, a. homer hilsen, B&M Luxos, bar-end shifters, Berthoud, bike commute, Boxy Rando, Cycles Toussaint, cypres, double butted, Gran Bois, Hetre, low-trail, nitto, noodles, planing, randonneur, Rawland, rene herse, rivendell, rSogn, shimmy, SPD, Velo Routier


BH-1.jpg

I’ve been riding the Cycles Toussaint Velo Routier for a few days – have about 50 miles on it so far.  I wanted to collect my thoughts as this is a new geometry and tire size for me.  As for the rest of it, it’s very similar in size, weight, and materials (steel) to my A. Homer Hilsen.  I’ve used a nearly identical build for the bikes, as well.  Both have Nitto Noodle 41cm bars wrapped in cotton tape, both have the Rene Herse cranks, and both are within a few millimeters of dimension for fit.  the main difference is the wheel size, tires, and geometry with the Velo Routier being a “low trail” and the Hilsen a “mid-trail” ride.  OK – getting to the gut reaction first.

BH-4.jpg

BH-1.jpg

The Hetres really smooth out the ride on my rather bumpy commute.  Although I’m on bike trails most of the time, my commute has a number of rough spots with roots pushing up the pavement on the trail, as well as general poor road maintenance in other spots.  The Hetres feel smoother as you would expect.  They have more air volume, and I have them pumped to 40psi rear, 30psi front.  Comparing this to the Cypres tires on the Hilsen at 65psi rear and 45psi front, it should be more forgiving.

BH-3.jpg

The bike feels just as fast.  This is gut, so I will watch my commute stats over a longer timeframe.  The first few rides are inconclusive as I’ve been more tired than usual. The ride times between bikes are within a few minutes out of an hour commute home.

BH-2.jpg

I can really feel the handling differences in the low-trail – and it is not as disruptive as some of the lit I’ve read.  The closest analogy I’ve heard is that “you steer with your bars” on the low-trail bike, whereas  on the Rivendells, you “steer with your hips”.  This seems accurate to me.  I can ride this bike no-handed.  It’s not easier to do this than the Rivendell – if anything it is just slightly more apt to wander around, but this may just be my lack of experience on this type of geometry.  The interesting part is the feel with a front load.  It is much more planted with a bag and a few pounds up front.  It also wanders less when going slow, and of course there is much less issue with wheel flop when the bike is stationary.  The ride feel is subjectively better with this setup for me.  I really like having a front rando bag for longer rides.  I can do nearly everything I need to do with all the gear within easy reach.  This all said, I was doing fine with the Hilsen and the front rando.  I just feel that the Toussaint “feels” more planted with this setup while riding.

BH-5.jpg

As I said earlier, the Hilsen and Velo Routier are set up proportionally identical for my fit.  Both bikes feel like a good steel bike should.  Solid, compliant, light enough.  Both are also beautiful in their own way.  The Hilsen will win this battle, but the Toussaint is very nice looking in white with stainless Berthoud fenders and subtle red/yellow decals.

BH-3.jpg

I haven’t had any shimmy issues with either bike.  The Velo Routier tracked like a steam engine on a 30+ mph descent, and I rode shimmy-free no-handed from 15-25 mph.  This seems to be the sweet spot for shimmy.  I know the tubing on the Toussaint is double-butted 4130, with  .9/.6/.9 top, seat, and down tubes on my size “large” frame.  The smaller sizes are .8/.5/.8.  This is not the “ultra-light” planing grade tubing that Jan Heine tends to like, and some of the Rawland bikes are built to, but I’ve ridden an rSogn, and it felt as stiff as this frame.  Perhaps I need more sensitivity training.  In any case, it rides really well, and I feel totally comfortable on this bike.  A longer test ride is due, and luckily this is all set and ready for the upcoming brevet season starting next week!

BH-7.jpg

Other comments on the build?  I had no problems getting the build done – there were no flukey gonzo issues like misalignments, or gummed up threads.  The hanger was straight, the fenders were already mounted, as were the brakes.  I ended up tightening up the fender alignment to match up the Hetres as it originally had 38mm Somas on it, but that was the biggest time suck.  I honestly had the thing built in a few hours, and I was taking my time.  It helped that I had a cockpit set up from a previous build – nice not to have to wrap the bars.  One note – I originally had SPD pedals, but put VP flats on it for the beginning of the season.  I want to try these on longer rides to see if I have a knee issue that bothered me last year with the clipless pedals.  I also migrated the 9-speed cassette and downtube shifters back to an 8-speed setup with bar-end shifters.  Oh, I also put the B&M Luxos dyno light on this bike for the season.

BH-10.jpg

One more item I forgot to add – I was very worried about what kind of front rack to use.  The center-pull Dia Compe 750 brakes leave very little room and the normal rando-standard Nitto Mini rack wouldn’t work.  Luckily, Cycles Toussaint has this figured out.  They have a special rack made just for this bike.  I exchanged emails (actually, blog comments) with Evan at Cycles Toussaint, and ordered it after I got the frame.   It arrived a few days later just in time for my build.  It fit perfectly with rear mounts that fit to the fork crown mounting screws.  The rack holds my Tall Boxy Rando bag from Acorn at just the right height – the top even with my bars.  Super happy with this.  It is also possible to saw the rear arms off, bend the lower support arms, and mount the rack to the fender at two points if you want a lower platform and a more “constructeur” touch as Evan did with his personal bike.

BH-7.jpg

Now it’s time to put some miles on this guy (and try not to forget my other bikes in the process).

Hunqa Builder

08 Tuesday May 2012

Posted by Stonehog in Cycling

≈ Leave a comment

Tags

atlantis, bike build, Bombadil, brooks, dureme, frame/fork, Haulin Colin, Hunqapillar, mammoth, marathon, Moustache, packaging, Rawland, rivendell, rSogn, wooly


It was time for a new bike for 2012.  This one is for the mountains!  It’s a wooly mammoth bike!  I rode one last summer at Rivendell World HQ and was smitten.  I just love Rivendell bikes.  Their design and execution is unlike any other, and Grant runs a great business. I decided to snarf up a Rivendell Hunqapillar.  It’s a 54cm frame, and will be set up as a mountain/camping/commuting bike with a front rack, fenders, and lights (like any proper bike for the NW).  This was in the original color scheme that is being discontinued.

The Rivendell folks are well known for their expertise in packing a bike – they even add doodle art to the packages – great personalized funk!

top face

stuck and safe

wrapped up tight

Here it is all uncloaked.  I love the color scheme on this model.  There is something about the kidney bean and gray combination that really classes out.  I felt lucky getting one of the last of the original runs.

profile

front quarter

love

tusks

 

The build out will be a moustache cockpit, brooks saddle, and marathon dureme tires (700×50).  This will be a working bike, and I want to take it anywhere.  I also want to be comfortable on the bumps.

kit

I’m adding a custom rack made by a local builder “Haulin’ Colin” Stevens.  This was originally designed and made for the Rawland rSogn, but I saw it on his site modeled on a Hunqapillar that a friend had lent him, and the image stuck.  The rack fits the bike perfectly.

haulin’

mounts were perfect

I have a few more parts to get or scavenge before this one is ready, but I’m anticipating a great new ride.  The frame and fork with headset weighed in the neighborhood of 7 lbs on my Wii scale (accurate??).  This is a stout tube bike, but it felt surprisingly light.  I recalled it being much lighter than I expected on the test ride, as well.  This model is a more robust touring bike than the well-loved Atlantis, and has similar gauge tubing to the Bombadil.  I can’t wait to do some exploring this summer!

Rawland, Riv, and Trail

25 Friday Mar 2011

Posted by Stonehog in Cycling

≈ Leave a comment

Tags

basket, porteur, Rawland, rivendell, rSogn, Trail, Wald


As a Rivendell owner, and Bicycle Quarterly reader, I have become aware of the trail conundrum in bike handling with a front load.  I have an A. Homer Hilsen that I have set up with both a front basket,

Front basket porteur style

and an Acorn Boxy Rando bag.

Back from a winter ride

I have carried up to 10 lbs in front on a number of occasions, and while it takes a few pedals to get used to the weight, it comes out just fine.  Jan Heine of Bicycle quarterly has made a strong case for lower trail numbers on a bike that will be carrying a front load.  This was a common geometry of nice French randonneuring bicycles in the 40’s and 50’s.

Rawland has been designing an update of their Sogn all-rounder with low trail numbers.  I am very tempted to try one out and see if I can tell the difference.  I may wait for a while as a few of the Seattle Riv riders are likely getting one.  I’ll hopefully be able to take one for a spin…

Top Posts & Pages

  • Commuting Balance
    Commuting Balance
  • New fenders, old bike
    New fenders, old bike
  • Gorge(ous) Rides
    Gorge(ous) Rides
  • A. Homer Hilsen 7-year Review
    A. Homer Hilsen 7-year Review
  • The Little Things...
    The Little Things...
  • Backup Bike
    Backup Bike
  • Trillium Forest
    Trillium Forest
  • Winter Hills
    Winter Hills

Flickr Photos

BH-19.jpgBH-18.jpgBH-17.jpgBH-16.jpgBH-15.jpgBH-14.jpgBH-13.jpgBH-12.jpgBH-11.jpgBH-10.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 95 other followers
Follow Cycle Seattle on WordPress.com

Blog at WordPress.com.

  • Follow Following
    • Cycle Seattle
    • Join 95 other followers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar
 

Loading Comments...