• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: ride comfort

Drop Some Wisdom

17 Sunday Mar 2013

Posted by Stonehog in Cycling

≈ Leave a comment

Tags

200k, cork tape, cotton bar tape, drop bars, hand comfort, nitto, Nitto B-115, nitto noodles, noodles, Olympiade, populaire, porteur, randonneur, ride comfort, rivendell, VO


When I started riding road bikes again around 2009, I read a lot of opinion on the “internets”, and a few things were spoken of as gospel.  One of these was:

  • Drop bars, in particular Noodle bars are great for long term comfort (Discussion Thread from ’09)

I’m a dedicated experimenter/tweaker when it comes to building and riding bikes.  I had been on road bikes with drop bars for a short period of my life from about 1983-1991, but mainly as a part-time commuter.  I never raced, and only did one 2-day 150 mile ride in high school.

My old road bike – Raleigh Reliant

When I moved to Seattle in 1991, I rode a friend’s mountain bike down some fire  trails in Whistler, BC, and was totally smitten.  From then until 2009, I had various mountain bikes with flat bars.  When I bought my first Rivendell, I tried 46cm Noodles, but found them uncomfortable.  Specifically, when I was in the drops, they felt really deep/extreme, and my forearms hit the tops disconcertingly.  There was something off.

Cupcake and Homer with 46cm Noodles

I found VO Porteur bars to be a better fit for me initially, as they had a nice stretched-out thin position on the flat fronts, and I could also get very upright on the swept back part of the bars.  I went through a few iterations with these bars until I started riding in longer Randonneur events.  On one Populaire, I developed a bit of numbness in one hand at the 50-mile mark, even with soft cork tape.  I was definitely the only rider using upright bars of any kind, and most of  the folks were using drop bars of some sort.

Porteur with Cork and Cotton

I decided that I would have to try some drops for the longer 200k ride I had planned.  I had an older pair of Nitto B-115 Olympiade bars from the 80s, and the width was a tiny 39cm (compared to the 46cm).  I set these guys up, and found them comfortable on my commute (7-12 miles each way). I also found that my forearms didn’t hit the tops of the bars when I was in the drops.  The next test was the Bellingham 200k.

Olympiades

At the end of the event, I had no hand discomfort, and felt that the bars were close to ideal.  They just needed more width, and a bit of curve back like the old noodles had on the tops.  This led me back to the beginning (almost) and the Noodle style I started out with.  I went with the next bigger size of Noodles and have not gone back to uprights.

Sometimes it is best to listen to the wisdom/opinion of experienced riders in the first place.  At least cheaper…

Faves! Nitto Noodle 42cm with SRAM S500 Levers

Top Posts & Pages

  • Commuting Balance
    Commuting Balance
  • New fenders, old bike
    New fenders, old bike
  • Gorge(ous) Rides
    Gorge(ous) Rides
  • A. Homer Hilsen 7-year Review
    A. Homer Hilsen 7-year Review
  • The Little Things...
    The Little Things...
  • Backup Bike
    Backup Bike
  • Trillium Forest
    Trillium Forest
  • Winter Hills
    Winter Hills

Flickr Photos

BH-19.jpgBH-18.jpgBH-17.jpgBH-16.jpgBH-15.jpgBH-14.jpgBH-13.jpgBH-12.jpgBH-11.jpgBH-10.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 95 other followers
Follow Cycle Seattle on WordPress.com

Blog at WordPress.com.

  • Follow Following
    • Cycle Seattle
    • Join 95 other followers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar