• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: randoneurring

Image

New Toussaints

23 Wednesday Dec 2015

Tags

bicycle, commute, cross, Cycles Toussaint, gravel, pavé, randoneurring, Velo Routier


Our northern buddies at Cycles Toussaint in Calgary have introduced a new Vélo Routier.  I took one out for a spin to see how it compared to my v1 bike.

BH-2.jpg

V2 Vélo Routier

My first impression was that it felt just like my Vélo Routier. I’m not sure that I would be able to tell the difference in a blind test. It felt planted and quick steering.  Comfortable, not quirky.  This was set up similar to my own bike, with a Selle Anatomica, Noodles, bar-end shifting, and Compass tires.  This geometry just works for me.  Nice bike, great brakes.  They offer the v2 in 2 versions – one with braze-ons, and one without.  I really like the braze-on centerpulls and the quirky seat-stay pump mount, so that would be my choice.  The blue color is a nice change, too.  One new quirk – there is a slotted rear axle mount now, to better accommodate IGH or fixed/single gear hubs.  While this opens up the bike to more options, it may make bikes with fenders tougher to change out a flat on, but there are ways around the problem.

BH-4.jpg

Toussaint Pavé

The next bike is a demo that is a new direction for Toussaint.  I believe this is an all-round road/gravel, maybe even cross bike.  It was set up racier than I would typically ride, but it was surprising in a number of ways.  The tubing is all stainless steel, which gives it a fairly “ti” look.  The downtube is quite oversized, as well, at 38.1mm. This seems overly stiff for my weight range, but can be offset with cushy tires. It is spec’d to take a 45mm fender, so I would assume you could put the Compass Barlow Pass tires on with no problems. It looks like a Clement MSO would fit fine for a bit more bite.

Toussaint used interesting plated fork and seat stay crowns. I like the classic low fork bend of the Routier more. To my eyes, it would be a great match for the double plate crown on this bike. The “banana” bend just looks odd to me.  I assume it makes the disc attachment easier/stiffer, but if the bike could use a more classic bend here, it would be prettier.

 

BH-5.jpg

Double Plate Crown

Disks make it a great utility rain bike.  I found the bike to be quite like the Vélo Routier in feel – even with a bit more trail on the Pavé (45mm).  It still felt quick steering, and was light and fun to ride. I was wondering how it would be with some front or rear load. I may see if I can get an extended trial to find out.

BH-6.jpg

Seat Stays

After the ride, I am hopeful this bike would fall into a similar price range as the Vélo Routier – if you could get a bike built for the rainy NW commute, not have to worry about rust or wet brakes, and still maintain great geometry that would handle randonneuring or lightly loaded gravel adventure rides – nirvana, right there!

The Toussaint blog (with lots of good info on the tubing, geometry, etc…) is saying they hope to sell these for around $2000, so I guess the tubing makes a big difference, but we’ll see what happens if they do a production run. This is a cool, practical bike!

Posted by Stonehog | Filed under Cycling, Northwest

≈ Leave a comment

300k and Artist’s Point

14 Wednesday Aug 2013

Posted by Stonehog in Cycling

≈ 13 Comments

Tags

200k, Artist's Point, cypres, mechanical, Mt. Baker, Mt. Shuksan, Paul Racers, Peace Arch, randoneurring, RUSA, Selle Anatomica, SIR, Whatcom County


Homer

This seemed like the perfect first 300k: similar venue to my first 200k in Whatcom County in Northwest WA state, perfect 70 degree weather, a challenging 5000′ climb to Artist’s Point between Mt. Baker and Mt. Shuksan, and mostly flat after the first 100k.  Sounds doable, and even fun.  I hadn’t done a longer ride (more than the 13-mile commute home) since a 40-miler on the 1st of June.  I rode a total of 80 miles the week before in 4 days of commuting, so I was half-way there, but I was still feeling a bit under-prepared.  It didn’t help my mental state when the ride host, Dan Turner, said that this was a “harder 300k”.  Hmmm.  Still, I had a goal of doing a 300k this year, and this looked to be the best shot.

I took some randoly advice and drove up to Bellingham the night before and camped out in his yard.  Didn’t sleep much, though – kept drifting in and out of sleep in anticipation.

At 6:00am, I got up and had some coffee, donuts, and eggs that Dan and his wife prepared for the riders.  I loaded up on Mojo bars and jerky, and filled my bottles, and we promptly set out at 7am.  The first 20-30 miles went fast, and I rode with the main lump of riders at a pace of about 20mph.  It was fast, but I felt good, and it was nice and easy holding in the peloton.

Into the Eastern Sunrise

This was a pretty serious bunch of Randonneurs.  Of the ~20 riders that started, many of them were veterans of years of 1200k’s.  There were 2 or 3 of us that were also first time 300k’ers, with one gal, Mandy, who had just joined RUSA and SIR the night before, and was doing her first rando event.

As we neared the mountains and got into the first bit of the foothills, the riders started spreading out, and from that point to the top, I never rode with more than one person for short stretches.

Into the Hills

The bike was riding well, and everything felt spot on.  Things I was slightly concerned about going into this ride included:

  • Seat Comfort – I had put on the Selle Anatomica the week before the ride as it was great on my last 200k
  • Shoes/pedals – I had not put more than 20 miles on my new Sidi Spiders
  • Tires – would the well used Cypres go the distance?
  • Brakes – how well would the Paul Racers stop on the long descent down from Artist’s Point?
  • Food/Water intake – could I deal with a 17-hour day in the saddle?

I had checked some of the times that SIR riders with similar 200k times had done on earlier 300k’s to give myself an idea on how I should expect to do.  They seemed to vary from 17-19 hours, so I of course figured I would shoot for 17.  This would bring me into home base around midnight.  I was also motivated by the promise of burgers and beer, and midnight seemed a bit late, but not too late for dinner 🙂  I really thought that getting up the big climb quickly would keep me in the time, and this proved mostly true.

Climbing into Beauty

 

Final Few Switchbacks

After some 30 miles of climbing that turned knarly for the last 10 miles, I made it to the top, and some seriously great views.  The clouds were starting to part, and the peaks were showing through.  Mt. Baker is infamously invisible in clouds, and in normal fashion, I only saw glimpses of it on the way up and at the top.  Shuksan was a bit more cooperative.

At the Top

I had a quick bite and refilled the bottles, and felt like I should really high-tail it outta there ASAP.  I still had a 200k (~130 miles) left.  So far so good.  Now came the fun part!  I love descending, and some racer boyz had ripped past me on the way up.  As I left the parking area, they started their descent in front of me, so I latched onto one of them and enjoyed the ride down.  All I can say is that at some point we passed 2 cars!

At the bottom, I had my first real trial of the ride.  As I shifted into the big chainring, my chain stuck to the teeth and came around to pop the outer plate off my front derailleur.  I had been riding quickly with a couple fellows, and stopped to see if I could fix it.  I quickly surmised that I was now riding a 1×9, so I shifted it into the big-ring, made sure the plate was bent in enough to stay out of the crank/shoe path, and proceeded into the berry fields around Sumas near the Canadian border.

Berries for 40 Miles

I hooked back up with a group of 4 other randos and we rode the next 20 miles together in a tight peloton making great speed.  This was the most fun part of the ride for me as we chatted and the miles flew by.  One of the fellows had “questionable” shorts, perhaps a bit past their prime wear – a little too many miles on these guys – imagine the problem the yoga pants company had recently and you’ll catch the drift, so as long as I wasn’t directly behind him, things were great 🙂  The control stops were really nice, as well.  We were picking up 75-cent kid’s cones, and enjoying the short rests.

Ice Cream!

After the Lynden control, I had my second setback.  My knees were starting to get a bit sore, and I found that I could no longer stand up to climb without major pain in my left knee.  It felt like it was swelling a bit, so I eased off the back of the pack, and rode a bit.  I stopped on the side of the road to stretch out a bit, but this didn’t do much.  I started thinking about the logistics of calling my wife and waiting the 3 hours for her to come up and pick me up near the border.  Hmmmm – if I can just make it to Peace Arch park and get some Advil – yeah that’s what I’ll do.  I had already gone just over 200k, and had about 50 miles left.  I walked up a few of the steeper hills, and eventually found myself rolling into Blaine, WA.  I stopped at a gas station and bought a few packs of ibuprofen and quickly took a pair.  After weaving my way through the border town and reaching the coast, my legs started feeling better.  I also realized I could make good headway by pulling up with my left pedal stroke, and doing the normal push with my right.

“Pain-da”

This part of the country was interesting enough to keep my spirits up, with great stretches of closed roadway and wide open fields, and distant views of the mountains I had been in at the start of the day.  After getting past the coastal stretch of the ride, and starting to head back towards Bellingham, I was sure I could finish – perhaps even within my time goal.  At one point, I found one of the gents from the earlier group waiting on the side of the road with a binding bottom bracket.  He was out, and I felt really bad as he had put in over 250k at that point.  He assured me he had a ride coming, and a short while later, I came up on another guy who was having some leg cramping.  We ended up riding together on and off for the rest of the way back.  At the penultimate control, I had to pick up more Advil, but having only 15 miles left, I was starting to ride on the endorphins.

Rollin’ Towards 300k

I rolled into the final control, and the end of the ride right at 11pm.  All the folks I had ridden with earlier had arrived shortly before, so we all ate and chatted about the great day.  I took a quick shower and climbed in my tent for some needed rest.

Verdict:  I can finish a 300k bike ride, and still feel good enough to enjoy a hot dog and beer.  I can climb 5000+ feet and not keel over!  The Selle Anatomica and Sidi shoes passed with flying colors:  The only sore parts of me were my knees.  No flats or braking issues.  I never bonked, so I managed my food/water intake just fine.  Hmmm – this pushing the limits stuff is getting addictive.  It certainly helps when the ride has tons of natural beauty, and the weather is fair!

 

WTS 1 Redmond – Carnation

09 Wednesday Jan 2013

Posted by Stonehog in Cycling

≈ 1 Comment

Tags

a. homer hilsen, acorn bags, brooks, brooks Finesse, randoneurring, SIR, winter training, WTS


Homer-1.jpgHomer-4.jpgHomer-5.jpgHomer-3.jpgHomer-2.jpgHomer-7.jpgHomer-6.jpgHomer-8.jpg

WTS 1 Redmond – Carnation, a set on Flickr.

Seattle Randonneurs (SIR) puts on a Winter Training Series in January that gets us ready for the spring series of riding. It’s interesting in that it is usually pretty dismal weather, but I have to remember that 30’s and 40’s aren’t bad when compared to my old stomping grounds (Minnesota).

To that end I rode in the first ride of the series this year, and will try to get in as many as I can. This ride started in Redmond and went out to Carnation and back in a nice hilly loop that had about 2300 feet in elevation gain. The second hill was a killer, but there were some really great descents. Nearly no traffic on this route, and fairly good roads. I rained on us most of the route, but I didn’t hit any slippery spots.

WTS1Map

As the bike goes, I was riding the Hilsen in rando garb. The Acorn Tall Boxy Rando bag was awesome and useful. I had extra clothes in it and a clif bar, but not much else. I also brought 2 bottles of h2o and only used one in the 38 miles we rode. I had the Brooks Finesse Ti saddle I recently purchased from Kent Peterson on the bike. While it was comfortable, I think I am going to go back to a full size saddle as it felt odd to me – not as much room to move around? Perhaps it was just less gripping area from what I am used to. I still want to give the Rivet a chance on a longer ride – perhaps I’ll put that one back on…

GPS vs. iPhone

28 Tuesday Aug 2012

Posted by Stonehog in Cycling

≈ 10 Comments

Tags

ahh, case, charger, cyclemeter, dynamo, garmin, gps, hilsen, iphone, motionx gps, randoneurring, rivendell, runkeeper


When I decided to try out the insane sport of randoneurring, I quickly found that my iPhone running my tracking app, RunKeeper, was not going to work.  The battery only lasted 4 hours in GPS mode, and these rides started at about 4-5 hours.  I ran out and picked up a Garmin, as these things still take AA batteries and go for 25 hours before expiring.  After riding it on one brevet in March, and fiddling/cursing the old mode of convoluted GPS UI/OS the Garmins use, I launched it off the handlebar mount on a large bump on the commute home one night.  I didn’t notice it was gone until I came to the next stop light, and after circling back to the likely area, it was never found.  After weighing the logic of dumping another $200 into a device I found cumbersome, I decided against it.  The iPhone has GPS and will always have a more competitive app arena that will ensure the best GPS experience.  Already, apps like CycleMeter, MotionX GPS, and RunKeeper have better UIs and more specific usability features.  Now I just had to find a way to use my dynamo hub to power both the lights and the iPhone.

There are a few options out there.  Peter White sells some chargers, Wahoo makes a case with built in battery, but I settled on the BioLogic ReeCharge system that is made up of a case/battery combo, a handlebar mount, and a dynamo charging system.  The setup was very straightforward, and I used my older iPhone 4 with it for the first few weeks (in case it launched, as well)

iPhone case mounted on A. Homer Hilsen

I had no issues with the case coming loose on both road and trail over the past month or two of use.  I have put a couple hundred miles on the bikes with the case mount, and gone over some knarly bumps, but the case has held fast.  This is by no means an exhaustive test regime, but it has certainly done better than the Garmin I had.  Wiring on both bikes was simply a matter of merging the light and ReeCharge wires at the clips that attach to the hub.  This took about 15 minutes at most.  The other end just plugs into the handlebar mount.  I honestly had a tougher time figuring out what to do with all the extra wire.  I took a couple different tacks on the two bikes.  On the Hilsen, I wrapped the extra around the handlebar mount, as I was trying to minimize the wiring down on the frame:

Wrapped around handlebar mount

On the Hunqapillar, I coiled the cable around the shifter cabling.  I did this one first, and didn’t like the result, as it is more visible overall:

Coiled

The dynamo unit is strapped to the back of one of the fork legs, and simply held in place by zip ties.  Here are some pics of my wiring on the Hilsen.  I followed the basic process that Lovely Bicycle had posted a while back to keep the wiring as invisible as possible, while still being an easy job that doesn’t require any frame drilling or fiddling.

Front Hub Mount Point

ReeCharge unit

Cabled up to Bar Mount

More images of how the lighting cables are run are found HERE.

 

 

 

 

Flickr Photos

BH-19.jpgBH-18.jpgBH-17.jpgBH-16.jpgBH-15.jpgBH-14.jpgBH-13.jpgBH-12.jpgBH-11.jpgBH-10.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 95 other subscribers

Blog at WordPress.com.

  • Follow Following
    • Cycle Seattle
    • Join 95 other followers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar