• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: pavé

Image

New Toussaints

23 Wednesday Dec 2015

Tags

bicycle, commute, cross, Cycles Toussaint, gravel, pavé, randoneurring, Velo Routier


Our northern buddies at Cycles Toussaint in Calgary have introduced a new Vélo Routier.  I took one out for a spin to see how it compared to my v1 bike.

BH-2.jpg

V2 Vélo Routier

My first impression was that it felt just like my Vélo Routier. I’m not sure that I would be able to tell the difference in a blind test. It felt planted and quick steering.  Comfortable, not quirky.  This was set up similar to my own bike, with a Selle Anatomica, Noodles, bar-end shifting, and Compass tires.  This geometry just works for me.  Nice bike, great brakes.  They offer the v2 in 2 versions – one with braze-ons, and one without.  I really like the braze-on centerpulls and the quirky seat-stay pump mount, so that would be my choice.  The blue color is a nice change, too.  One new quirk – there is a slotted rear axle mount now, to better accommodate IGH or fixed/single gear hubs.  While this opens up the bike to more options, it may make bikes with fenders tougher to change out a flat on, but there are ways around the problem.

BH-4.jpg

Toussaint Pavé

The next bike is a demo that is a new direction for Toussaint.  I believe this is an all-round road/gravel, maybe even cross bike.  It was set up racier than I would typically ride, but it was surprising in a number of ways.  The tubing is all stainless steel, which gives it a fairly “ti” look.  The downtube is quite oversized, as well, at 38.1mm. This seems overly stiff for my weight range, but can be offset with cushy tires. It is spec’d to take a 45mm fender, so I would assume you could put the Compass Barlow Pass tires on with no problems. It looks like a Clement MSO would fit fine for a bit more bite.

Toussaint used interesting plated fork and seat stay crowns. I like the classic low fork bend of the Routier more. To my eyes, it would be a great match for the double plate crown on this bike. The “banana” bend just looks odd to me.  I assume it makes the disc attachment easier/stiffer, but if the bike could use a more classic bend here, it would be prettier.

 

BH-5.jpg

Double Plate Crown

Disks make it a great utility rain bike.  I found the bike to be quite like the Vélo Routier in feel – even with a bit more trail on the Pavé (45mm).  It still felt quick steering, and was light and fun to ride. I was wondering how it would be with some front or rear load. I may see if I can get an extended trial to find out.

BH-6.jpg

Seat Stays

After the ride, I am hopeful this bike would fall into a similar price range as the Vélo Routier – if you could get a bike built for the rainy NW commute, not have to worry about rust or wet brakes, and still maintain great geometry that would handle randonneuring or lightly loaded gravel adventure rides – nirvana, right there!

The Toussaint blog (with lots of good info on the tubing, geometry, etc…) is saying they hope to sell these for around $2000, so I guess the tubing makes a big difference, but we’ll see what happens if they do a production run. This is a cool, practical bike!

Posted by Stonehog | Filed under Cycling, Northwest

≈ Leave a comment

Flickr Photos

BH-19.jpgBH-18.jpgBH-17.jpgBH-16.jpgBH-15.jpgBH-14.jpgBH-13.jpgBH-12.jpgBH-11.jpgBH-10.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 95 other subscribers

Blog at WordPress.com.

  • Follow Following
    • Cycle Seattle
    • Join 95 other followers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar