• About Me

Cycle Seattle

~ Posts on bikes

Cycle Seattle

Tag Archives: randonneur

Hilsen Lighting v 2.0

18 Tuesday Sep 2012

Posted by Brian Hanson in Cycling

≈ Leave a comment

Tags

a. homer hilsen, Biologic, dynamo, dynamo lighting, Edelux, randonneur, Reecharge


ProfileCockpitFrom aboveWiring SideWaiting for a dynoLighting under the rack
Chainring Light BracketReecharge MountedPanda?WiringWiring Route Joining at the forkCable Routing
Under the bottom bracketAnd upAnd up to the lightAt lightReecharge WiringFrom the top
Another View

Hilsen Lighting v 2.0, a set on Flickr.

In my quest for light and power perfection, I added a charging setup, as well as a new mount for my headlight on my rando bike. The plan is to power it all via dynamo hub…

Via Flickr:
I added the BioLogic Reecharge adapter, and set up the light to mount under the rack so as not to interfere with the platform. This was about the only place I could fit a mount on the Mark’s Rack keeping the light under the rack bed.

Leather Saddles

02 Thursday Aug 2012

Posted by Brian Hanson in Cycling

≈ 3 Comments

Tags

B17, brooks, Deb Banks, leather, obenaufs, Pearl, proofide, randonneur, Rivet, saddle, Selle Anatomica, Titanico


Brooks B17 – Rivet Pearl – Selle Anatomica Titanico (left to right)

I’m a convert to the comfort of a good leather saddle for longer distance bike rides.  The look and durability of a nice leather saddle is a plus, as well.  I’ve been riding the Brooks B17 saddles since 2008, and have ridden up to 200km on one.  At that distance, I was not too sore post-ride, but I definitely had a bit of numbness for a few days.  The only other issue with the B17 is that you have some minor maintenance  to attend to if you want the saddle to last.  It is not waterproof, so a cover, and regular application of a leather treatment (Brooks Proofide, or Obenauf’s) is recommended to keep a saddle in good shape.

I was rebuilding a bike for a friend, and he wanted to try a leather saddle, so I bought a couple of Selle Anatomica (SA) Titanicos.  I figured he would be less inclined to baby the saddle, and they advertise  a “water resistant” leather.  The current thoughts on the SA saddles is that they don’t hold up well to clydesdales (folks on the positive side of 200 lbs).  I’ve even read that they tend to stretch out quite a bit for folks in the 180 lb range, and often end up with maxed out tensioning screws within a year.

In looking for a good color match for the kidney and gray scheme on my Hunqapillar, I also wanted to add a Rivet Pearl saddle to the mix.  This is a new saddle maker that uses US leather and design, and builds the saddles in Taiwan.  The owner/founder is a well known randonneuse named Debra Banks who had worked for Selle Anatomica.  This saddle has a cutout like the SA, but is built with thicker leather to firm it up.  As a distance rider runs this company, I am hopeful it is designed to provide long distance comfort, and initial reports are that it does.

My observations are as follows:

(l-r) Selle Anatomica – Rivet – Brooks

  1. In measuring the setback, I did some rough measurement of the front-most point on the rails to the front of the saddle.  The SA had the most adjustability and measured only 10cm from the front of the saddle to the front-most point of mounting on the rail.  The Rivet had the second most amount of setback with a measurement of 12cm from the front of the saddle.  The venerable B17 was at 14cm.  You can see this clearly in the photo above.
  2. The Selle Anatomica is immediately comfortable and tends to disappear from thought.  It is more finicky to line up for proper comfort – the angle has to be right.  It is very much like a stretchy hammock, and has a lot of movement or “give” while riding.  I’ve already tensioned the saddle after about 200 miles of commute use, and have the tension screw halfway out.  The bag loops in the back are close to being unusable as they line up with, and have interference from the saddle rails.  Getting a bag on it is doable, but could be a lot simpler with a small adjustment in where they line up.  The finish of the saddle is a bit rough at the edges.  I also notice the front of the saddle twisting slightly when I lift the bike by the seat.  It is not a problem, but it seems a bit odd if you are used to seats being one-piece immobile affairs.  The rails have the longest adjustability of the three saddles, and I can move the saddle back farther on the post than the other two saddles.
  3. The Rivet saddle is very firm.  It is not a hammock like the SA – much more like a firm Brooks saddle.  The finish is beautiful – better than the SA saddle.  It is more in the realm of Brooks quality, although I still think the Brooks is tops in this category.  More “classic” anyway.

I have not ridden the Rivet more than a few miles so I can’t comment on break-in feel.  I will have to report back on that after a few hundred kms.  I have installed the Rivet on my Hunqapillar which will become my daily commuter, as well as camp/tour bike.  The SA is now on my Hilsen which will do primary duty on brevets for the immediate future.  It is still the most comfortable of the three, and I have no problem with it on my 18-mile round trip commute in plain old pants or short (no padding).  I’ve got a pair of B17s sitting on the shelf in semi-retirement.  If the SA gives out, or the Rivet doesn’t break-in, they will go back on the bikes.  They are my benchmarks.  I may have one of them “slotted” by SA if I feel compelled.

Brooks B17 Side Shot

Rivet Pearl Side Shot

Selle Anatomica Titanico Side Shot

 

 

Standard Backup Kit

28 Monday May 2012

Posted by Brian Hanson in Cycling

≈ Leave a comment

Tags

kit, lock, patch kit, randonneur, saddle bag, tire change, tools, zip tie


I have had a few mechanicals in my day, and learned long ago that it is wise to be prepared.  As such, I have a small bag on all my bikes that contains the basics to get me home after a flat or other minor mechanical.  This is a view of the two kits I use on my commute bike and rando bike.  The basics are all here, and include:

  1. Spare tube for tire
  2. Tube patch kit (for more than one blowout)
  3. Tire Irons
  4. Zip Ties (cheap fasteners)
  5. Tape (ditto)
  6. Chain tool
  7. Basic hex wrenchs
  8. Phillips and flat head screwdriver
  9. Seat cover for leather Brooks B17

Commute bike bag

I have a few extras in my randonneur bag:

  1. Lock/Cable
  2. Cargo net
  3. Spare Change
  4. Knife
  5. Handkerchief
  6. First Aid supplies/Ibuprofen
  7. Latex Glove/Rag

Randonneur Tool Kit

Now if I’m on a long solo ride, or camping trip, all bets are off.  I would have more kit for more extreme rides, no doubt.  This stuff is the basic safety net I have with me all the time, however.

Rene Herse Crank

28 Monday May 2012

Posted by Brian Hanson in Cycling

≈ 5 Comments

Tags

compass, crankset, randonneur, rene herse, rivendell


Rene Herse Crank

I’ve been commuting for the past few weeks with one of the new Rene Herse cranks on my AHH.  http://www.compasscycle.com/cranks_bb.html  I haven’t seen any reviews on this yet, so I figured I would share a few thoughts/opinions.  I’m not really a crankoholic, and have mainly ridden wider Q mountain cranks.  I wanted to upgrade my rando bike a bit, and thought a well built crankset would be a nice add.  Something that would last as long as the frame, perhaps.

Spacing on non-drive side

I’ve never had any experience with a narrow tread road bike, and was a bit worried that having a narrow Q would be a problem.  So far that has not worked out to be the case.  I find it comfortable, and natural.  The length of these are 171mm, which is close to what I’m finding to be ideal for me.  I tend to favor the 170mm cranks I have on another bike over the 175mm I’ve been using for the past 20 years.  It feels like less of a stretch when I’m just cruising on road and light trail.

Drive-side clearance

The finish and feel of these cranks is indeed very nice, and every bit as good as it has been billed.  The chainrings are nice and thick, but elegant.  To me, these cranks feel more solid than the others I’ve used lately including Sugino XD, Suntour XC Pro, and modern Shimano Deore and XT cranks, as well as a Race Face outboard bearing set I have on my mtb.   They are very nice to look at, as well, with a highly polished finish, and simple, clean and classy lines that go really well with the Rivendell frame.

non-drive side

It was recommended by Jan that I use a 110mm bottom bracket, so I ordered one, but decided to try the cranks with a 107mm that I had on already.  They went on easily, and the arms have at least 3-5mm clearance with the chainstays.

Chainline

The chainline is adequate, as well.  I purchased 44/28 rings to go with an 11-32 cassette.  This gives me plenty of range for the hilly riding I do in the area.  Bottom line – I highly recommend these.  Love em!

drive-side

My First 200k

20 Tuesday Mar 2012

Posted by Brian Hanson in Cycling

≈ 2 Comments

Tags

200k, ahh, bellingham, brevet, etrex, garmin, hazelnut, rando, randonneur, rivendell, SIR


After working up some distance with a couple Populaire’s and a 32 miler over the past few months, I signed up for, and rode my first full 200k (126 mile) brevet.  I had planned to head to Portland with my wife and daughter for a “brewpub” 100k, but when travel plans fell through, I saw that SIR was doing the Bellingham 200k the same weekend. Perfect intro to the longer distance!  It was a relatively flat ride for the area with 3-4k feet of elevation gain, so it seemed pretty reasonable for me to test my fitness.

The night before was packing and prepping.  I knew there was a chance of rain, and it would be in the upper 30’s to lower 4o’s most of the day, so I put an extra wool jersey and tights in my saddlebag, as well as spare socks and a hat.  I brought my rain gear thinking I would just pack it if necessary.  In the front rando bag, I put a couple packets of Perpetuem drink mix, some Nuun tablets for electrolytes, and various snacks like dark chocolate, a roll of Thin Mints (my daughter is a Girl Scout), and some snack mix.  I also threw in a couple small cans of V8.  Locked and loaded, I checked the bike and got my new Garmin eTrex set up and ready.  I did a dog walk, and then tried to follow the same 1 mile track on my bike.  After experimenting, I found a fairly good dashboard for biking that allowed me to navigate like I do in a car GPS in following a marked line.  I had downloaded the route earlier, so I had that ready to go.

Other incidentals in the bag were spare batteries, 2 tubes, and the usual tool kit for flats and such.

After listening to increasing rain all night, I had go get up at 4:30am to get up to Bellingham by 6:30 for check-in.  Driving up, I noted that the 1.5 hour drive at 60mph was less distance than I would be riding for the day, at only about 76 miles.  Intimidating, but I felt ready.  I stopped for a coffee at Starbucks, and the barista said there were a number of folks passing through that were on their way to a run, climb, or bike ride.  I was definitely not going to be alone on this wet day.

As I neared Bellingham, it started to snow.  Now I was getting excited!  The snow wouldn’t stick – it was too warm.  It would certainly be invigorating.

The machine

We left the coffee shop at 7:32am, and I told myself to take it easy and try not to burn out of the gate.  I had a long ride ahead.  There was a secret control not too far down the road at a lookout on Chuckanut Drive (normally a panoramic beauty of a road).

Chuckanut Drive

As it was snowing and cold, I commented that it probably couldn’t get any worse, and of course that sealed our fate for more of the same for the next few hours.  As we rode along Lake Whatcom, it started snowing harder, and seemed to be sticking everywhere but the road.  As we exited the lake’s northern end, I happened to run into a road race that was just getting started.  I pulled to the side for a cookie when the pace/support cars and about 30 riders came by climbing a long hill.  I thought to snap this pic a bit too late, but it shows the nasty conditions pretty well:

Road Racing

After this point, things started to look up.  I continued to ride solo as I had from the start.  I was trying to keep an easy pace, but also realized that the headwinds I was starting to run into would not help.  Luckily, I had tailwinds going north.

Definitely Sticking

Getting up to Sumas was a trip – lots of semi-flooded farmland that seemed to be growing hazelnuts.  I snapped a lot of pictures as the clouds were starting to clear and the sun was starting to break through occasionally.

Hazelnut Farms

Once I got to the border, I realized I had come a long way.  It felt like I was days away from Bellingham, but I still felt pretty good.  I had been keeping up with regular eating and taking water, and still had plenty of go.

Still Smiling at 100K

Now it was time to start heading back towards the water.  After riding along the invisible Cascade foothills, I started to get into a headwind.  This wasn’t too bad, but it definitely slowed me down, especially in the relatively few hilly sections.  It was a bit of a bummer saying goodbye to the mountains.

Goodbye Mountains

Riding on the border was a trip.  This section is populated and mainly farmland.  There was a road on the US side, a small ditch, and a road on the Canadian side.  It was like riding down a split highway.

Don't Jump That Ditch!

I saw quite a few border patrol cars, but it’s interesting seeing the big border crossings built up, and riding roughly 20 miles where one just has to jump across an open ditch to be in another country!  Along the boundary roads, I came upon another rando rider who blew a sidewall and needed a spare tire (not tube).  I told him that I hadn’t brought one, but may start packing one on future rides.  He told me it was the first time it happened to him in 20 years.  After wishing him good luck (and making sure he had a phone), I continued on.

Nice Border, Canada!

When I arrived in Blaine and saw the water again, I really knew I could do it.  It seemed so close now.

Puget Sound At Last!

At one of the controls, I met up with a couple riders who were fueling up, so I rode with them on an off for the next 20 mile or so.  It was getting windy now, and the forecast northwesterly winds turned out to be southwesterlies.  The paceline helped us get through the headwinds down to the Lummi ferry.  Riding in the Lummi nation was pretty cool.  I waved to a lot of folks on the way, and they waved back.  This was definitely friendly country, and not the hostile city environment I’m used to.

Ferry to Lummi Island

Lummi Land

At this point, there was all of 15 miles left – my typical commute.  I felt like I was in ok shape, but I definitely wanted to get back.  I started out faster, and quickly lost sight of my drafting friends.  There was a nice tail wind heading back north up the peninsula.  Lots of great views across the water of the final destination.  This was great motivation.  I was down to my last bit of water, and still had plenty of food, so things were looking really good.

Final Destination Just Over There...

Not Much Farther

Wild Tidal Patterns

The last 10 miles went by quickly, and I soon found myself in the final control with a group of happy Randonneurs congratulating me on finishing my first 200k!  Wow – it turned out really well, and I have to thank all the folks that encouraged me on the way.  This was a fast crowd.  I came in at 11 hrs 4 minutes, but the majority of the riders were in under 10 hours.  There were only 5 DNFs, and one that didn’t make the cutoff, but I was surprised that so many folks kept going with all the snow from the first half of the ride.

Back at Last

Consequently, my spare summer gloves came in handy.  I changed out my soaked winter gloves halfway through, thinking that the new ones would quickly freeze my fingers, but my hands and feet remained toasty after the rain stopped.

Now that I’ve done this distance, I can see doing a 300k, but 400 and up looks mighty challenging.  I definitely have no illusion that folks that pull off a 600k or 1200k are truly tough individuals!

Made it Without a Mechanical

Happy 200k'er

← Older posts
Newer posts →

Flickr Photos

BH-68.jpgBH-67.jpgBH-66.jpgBH-65.jpgBH-64.jpgBH-63.jpgBH-62.jpgBH-61.jpgBH-60.jpgBH-59.jpg
More Photos

Archive

  • August 2020 (1)
  • March 2018 (1)
  • January 2018 (1)
  • July 2017 (1)
  • June 2017 (1)
  • May 2017 (1)
  • February 2017 (1)
  • December 2016 (1)
  • November 2016 (1)
  • August 2016 (2)
  • March 2016 (1)
  • January 2016 (6)
  • December 2015 (2)
  • November 2015 (1)
  • June 2015 (5)
  • May 2015 (1)
  • April 2015 (1)
  • March 2015 (2)
  • January 2015 (2)
  • December 2014 (2)
  • November 2014 (2)
  • October 2014 (2)
  • September 2014 (2)
  • August 2014 (1)
  • July 2014 (1)
  • June 2014 (1)
  • May 2014 (2)
  • April 2014 (5)
  • March 2014 (4)
  • February 2014 (4)
  • January 2014 (6)
  • December 2013 (1)
  • November 2013 (2)
  • October 2013 (2)
  • September 2013 (1)
  • August 2013 (1)
  • July 2013 (2)
  • May 2013 (6)
  • April 2013 (1)
  • March 2013 (6)
  • February 2013 (2)
  • January 2013 (7)
  • December 2012 (5)
  • November 2012 (2)
  • October 2012 (2)
  • September 2012 (3)
  • August 2012 (3)
  • July 2012 (1)
  • June 2012 (4)
  • May 2012 (7)
  • April 2012 (1)
  • March 2012 (1)
  • February 2012 (4)
  • January 2012 (5)
  • December 2011 (6)
  • November 2011 (4)
  • June 2011 (2)
  • May 2011 (4)
  • March 2011 (2)
  • February 2011 (4)

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 96 other subscribers

Blog at WordPress.com.

  • Subscribe Subscribed
    • Cycle Seattle
    • Join 96 other subscribers
    • Already have a WordPress.com account? Log in now.
    • Cycle Seattle
    • Subscribe Subscribed
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar